Beat Frequency & Reverse Frequency
Pressing one function key to activate beat frequency or reverse frequency instead of re-programming parameter to change RX and TX between point- to- point communication and under repeater communication.

VFO Scan/ MR Scan
Multi-mode scan is convenient for team leader to monitor the on-site situations.

PTT ID Encode (DTMF)
It provides identification of radio to control center or radio with DTMF decode, it is quite useful for communication management. ENI will be sent when you press or release PTT button if this function is on.

110 Channels
A big channel capacity of 110 allows more flexible assignment among different user groups.

Monitor
To hear a weak signal, press MONI key. And it helps adjusting volume when no signal is received.

BCL
BCL is used to prevent the interference with the on-going conversation.

Talk confirmation Tone
Release PTT when the conversation is over and the receiver will hear the roger tone

TOT
The feature allows for more efficient use of channels by limiting the amount of time of each transmission. Also, it effectively avoids radio damage because of long-time transmission.

High/Low Power Switchable
The radio can be switchable for both low power and high power. When talk range is small, the radio can be switched to low power to save battery.

25KHz/12.5KHz Switchable
Different channel spacing 25KHz/12.5KHz is optional to confirm with the regulations of different countries.

Battery Power Indication and Alert
User can easily know the battery power state at a glace at the LCD. And LED flashes red to remind users to replace or charge the battery when the battery power is low.

CTCSS/CDCSS
CTCSS /CDCSS Encoder and Decoder is useful to avoid unwanted conversations on the same channel.

Wired Clone
To quickly set the parameters on a radio, you can clone the radio data from another radio with the supplied data cable, saving the time of parameter setting.

PC Programmable
Frequency and various features can be set by PC programming software.