Programmable Key
The key can be programmed as normal key or long & short key by PC software. And the key can be programmed with these functions: monitor, monitor momentary, squelch off, squelch off momentary, VOX, Announce battery power and emergency Elert.

Voice Prompts
This feature enable radio to report current channel , scan status,VOX status when press corresponding function key. It brings convenience to users in special applications, such as working in the darkness.

PTT ID Encode
It provides identification of radio to control center, easy for communication management.

CTCSS，CDCSS，2-Tone Encode & Decode
This feature in order to adapt to different systems around the world. And it is commonly used in Selective calling / signaling systems, usually in commercial and public safety radio systems.

Emergency Alert
Press the preset emergency key to emit emergency alarm, or send ENI or background noise to pre-defined person or dispatch center.

Announce Battery Power
There is voice prompt to remind user to replace or charge the battery when the battery power is low.

High/Low Power Switchable
The radio can be switchable for both low power and high power. When talk range is small, the radio can be switched to low power to save battery.

VOX
Hands-free operation is available when VOX function is turned ON.

25.0KHz/12.5KHz Switchable
Different channel spacing 25.0KHz/12.5KHz is optional to confirm with the regulations of different countries.

TOT
The feature allows for more efficient use of channels by limiting the amount of time of each transmission. Also, it effectively avoids radio damage because of long-time transmission.

BCL
BCL is used to prevent the interference with the on-going conversation.

Squelch (1~9 selectable)
It can minimize interference from undesired weak signals and enable weak signals be heard.
Talk confirmation Tone
Release PTT when the conversation is over and the receiver will hear the rogertone

Monitor
To hear a weak signal, press MONI key. And it helps adjusting volume when no signal is received.

Squelch Tail Elimination
The function will minimize the annoying audio outputs that occur at the receiver on completion of a transmission.

Scan
This feature enable radio scan each channels in scanning list by pressing side key function to activate scanning , in this way the user can detect which channel of partner in groups is available , then transmit signal to start communication .

CTCSS/CDCSS
CTCSS /CDCSS Encoder and Decoder is useful to avoid unwanted conversations on the same channel.

Wired Clone
To quickly set the parameters on a radio, you can clone the radio data from another radio with the supplied data cable, saving the time of parameter setting.

PC Programming
Frequency and various features can be set by PC programming software.